Parameters |
Rating |
|
|
Model No. |
UMANG 1100 |
UMANG 1600 |
UMANG 2025 |
UMANG 3050 |
UMANG 4500 |
|
System Capacity |
850VA |
1050VA |
1500VA |
2200VA |
3500VA |
|
Operating DC Voltage |
12V |
24V |
48V |
|
Switching Element |
Mosfet |
|
Charger Topology |
Boost Mosfet |
|
Battery Capacity |
200AH MAX. |
|
Operating Mode |
SMART/PCU/HYBRID |
Smart mode |
|
DG mode |
Enable/Disable |
Disable |
|
Parameters (Grid) |
Default Value |
Variable Range |
Nominal Grid Voltage |
230V 1Φ |
|
Nominal Grid frequency |
50Hz |
|
Frequency Range |
47-53Hz + 1Hz |
|
Default mode |
 TUB/SMF |
Tubular |
|
Grid Charging Voltage |
TUB |
Boost |
14.5V+0.2V |
13.5V-15V |
Grid Charging Voltage |
Float |
13.8V+0.2V |
13V-14.2V |
Grid Charging Voltage |
SMF |
Boost |
13.5V+0.2V |
13.5V-14.2V |
Grid Charging Voltage |
Float |
13.5V+0.2V |
13.5V-14.2V |
Battery Charging Method 4 Stages |
Bulk/Absorption/Float/Equalize |
|
Grid Charging Voltage (Equalize) |
After 30 Days |
NA |
Grid Charging Current (Normal/Boost) |
12A/15A +2A |
1A-20A |
Optional Grid charging |
Enable/Disable |
Enable |
|
Grid Reconnect @ Battery Voltage |
11.8V+0.2V |
11V-12V |
Grid Low Cut Voltage |
IT MODE ENABLE |
170V + 10V |
|
Grid Low Cut Recovery |
180V + 10V |
|
Grid High Cut Voltage |
265V + 10V |
|
Grid High Cut Recovery |
255V + 10V |
|
Grid Low Cut Voltage |
IT MODE DISABLE |
100V + 10V |
|
Grid Low Cut Recovery |
110V + 10V |
|
Grid High Cut Voltage |
290V + 10V |
|
Grid High Cut Recovery |
280V + 10V |
|
Changeover (Batt. to Mains) |
IT Mode Enable/Disable |
<5ms |
|
Changeover (Mains to Batt.) |
IT MODE : ENABLE |
<12ms |
|
IT MODE : DISABLE |
<30ms |
|
Parameters (Inverter) |
|
|
|
|
|
|
|
|
|
Output Phase |
1Φ |
|
Nominal Output Voltage |
220V±8% |
|
Nominal Frequency |
50Hz±1% |
50-60Hz |
Max. Output Current |
2.1A |
2.9A |
4.3A |
6.8A |
10.0A |
|
Battery Low Buzzer |
10.8V+0.2V |
Battery Low Cut +0.3V |
Battery Low Cut |
10.5V+0.2V |
10V-11.5V |
Battery High Cut |
16.5V+0.2V |
16.5V-17.5V |
Output Waveform |
Sinewave |
|
Typical Efficiency |
≥80% |
≥85% |
|
Voltage Harmonic |
<3% (Linear Load) |
|
Over Load Capacity |
IT Mode Disable |
>100% After 30 sec delay (with Alarm) 3Time Auto Reset , 4th Time Shut Down
Note : 1HP Motor Load Run for 15min with alarm (1 sec ON 5sec OFF) in  3050 Model. |
|
IT Mode Enable |
 >100% After 30 sec delay 1st Time Shut Down |
|
>150% Output Goes Down |
|
Motor 1 HP |
NA |
Yes (<7.5A) |
Yes |
|
Protection |
Overload, Battery Low, Battery High, Output Short Ckt., Battery Reverse (Fuse Blown) , Over Heat @90*C + 10*C , Over/Under Frequency, I/P Hi, I/P Low, SPV High. |
|
LED Indication |
System ON, (IT Mode, SMF/TUB, Boost Chg., DG Mode, Grid Chg.) Enable/Disable. |
|
Switches (Micro) |
Reset for System ON/OFF, UP, Down, Back, Enter(For LCD Calibration) |
|
Display ( Multi color) |
Battery Voltage, Charging Current, Grid Voltage, Grid Frequency, Output Voltage, Output Frequency, Load%, Battery Graph, Overheat, BLK/ABS/FLT , SPV Current, Operating Mode (HYB/PCU/SMT). |
|
Parameters (Solar) |
|
|
|
|
|
|
|
|
|
Switching Element |
Mosfet |
|
Type of Charger |
PWM |
|
SPV Charging Voltage (Boost) |
TUBULAR |
15V+0.2V |
14.2V-15.5V |
SPV Charging Voltage (Reconnect) |
14.2V+0.2V |
13.1V-14.5V |
SPV Charging Voltage (Boost) |
SMF |
14.0V+0.2V |
13.6V-14.5V |
SPV Charging Voltage (Reconnect) |
13.7V+0.2V |
13.6V-14.5V |
Efficiency |
≥95% |
|
Solar Current MIN. |
>3A (Below 3A, System will act like Solar Absent) |
|
Max. Solar Current . |
50A |
|
Input Voltage Range (Min – Max)Voc |
17V-25V |
31V-49.5V |
60V-99V |
|
Maximum PV Power Recommended |
700W |
850W |
1350W |
2000W |
3000W |
|
Parameters (Environment) |
|
|
|
|
|
|
|
|
|
Operating Temperature |
0-50°C |
|
Cooling |
Fan |
|
Max. Relative Humidity @25°C (non Condensing) |
95% |
|
Noise @ 1meter |
50dB |
|
Standard Compliance |
IP20 |
|
Weight (kg) |
10 |
11 |
15 |
28 |
40 |
|
Dimension L x W x H(mm) |
300x265x128 |
300x265x165 |
450x340x385 |
|
Reviews
There are no reviews yet.